Simulated radiator heat transfer performance comparison table Simulated radiator resistance performance comparison
From the simulation data of the double-drain pipe type radiator, the wave distance can be known from the simulation data. The water flow rate of the first drain pipe is basically the same, but the heat dissipation capacity of the second drain pipe is obviously smaller than that of the first row, which is only the first row. The simulation results found that after the cooling air exchanges heat with the second drain pipe, the temperature rises, and the temperature of the air inlet that exchanges heat with the second drain pipe increases, so that the average temperature difference between water and air in the second drain pipe decreases. According to the knowledge of heat transfer, the heat dissipation coefficient of the radiator is related to the average temperature difference between water and air, which is why the heat dissipation of the first drain pipe is significantly smaller than that of the first row. Comparison of results and conclusions The analysis table and table are the comparison of heat transfer performance and resistance performance of single drain pipe and double drain pipe radiator.
Table simulated radiator heat transfer performance comparison table simulated radiator resistance performance comparison can be seen from the table, although the heat dissipation area of the double drain pipe radiator is twice that of the single drain pipe radiator, but under the same working conditions, the double drain Compared with the single drain pipe type, the heat dissipation of the pipe type is only increased, but the wind resistance is nearly doubled. At the same time, the material used to manufacture the double drain pipe type radiator is also the same as the single drain pipe type, so the quality and manufacturing cost of the radiator will increase accordingly. Considering the heat transfer performance, resistance performance, economy and reliability of the radiator, it is not the most effective method to increase the number of water pipe rows to increase the heat dissipation of the radiator. In the actual design of automobile radiators, the improvement of the heat transfer coefficient of the tube-strip radiator should be considered from the aspects of optimizing the structural design of the radiator and improving the manufacturing process. Through the heat transfer wind tunnel test and numerical simulation study of a commercial vehicle tube belt radiator, according to the comparison and analysis of the simulation results, under the same working conditions, the double drain pipe type only increases the heat dissipation than the single drain pipe type. , While the wind resistance has nearly doubled, and the manufacturing materials have also nearly doubled. Therefore, considering the heat exchange performance, resistance performance, economy and reliability of the radiator, it is not the most effective method to increase the number of water pipe rows to increase the heat dissipation of the radiator.
The automotive parts and parts machining, PTJ Shop offers the highest degree of OEM service with a basis of 10+ years experience serving the automotive industry. Our automotive precision shop and experts deliver confidence. We have perfected the art of producing large component volumes with complete JIT reliability, backed by the quality and long-term reliability our customers expect.
Link to this article：Simulated radiator heat transfer performance comparison table Simulated radiator resistance performance comparison
Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting.：Cnc Machining，Thank